Use este identificador para citar ou linkar para este item:
http://www.repositorio.ufop.br/jspui/handle/123456789/13907
Título: | Effect of binder and drum speed on hematitic fines balling. |
Título(s) alternativo(s): | Efeito do ligante e da velocidade de rotação no pelotamento de finos hematíticos. |
Autor(es): | Cunha, Fernando Rodrigues da Luz, José Aurélio Medeiros da Neuppmann, Pedro Henrique |
Palavras-chave: | Granulation Iron ore Carboxymethylcellulose Bentonite |
Data do documento: | 2021 |
Referência: | CUNHA, F. R. da.; LUZ, J. A. M. da.; NEUPPMANN, P. H. Effect of binder and drum speed on hematitic fines balling. Tecnologia em Metalurgia, Materiais e Mineração, v. 18, p. e2197-8, 2021. Disponível em: <https://tecnologiammm.com.br/article/doi/10.4322/2176-1523.20212197>. Acesso em: 12 set. 2021. |
Resumo: | Determination of the physical properties of pellets is of great industrial importance since they are parameters that will allow a better use of the fines in the plants. Several studies relating different process variables with the pellet properties produced can be found in the literature, but it is still very difficult to predict the particle size distribution of the agglomerates of a new formulation only with the knowledge of its properties. In this study, the ore characterization was performed, evaluating the effect of the rotational speed of the drum and the performance comparison between two binders during green pellets granulation. Decrease of average diameter of the pellets with the use of a carboxymethylcellulosebased binder (Peridur 330, 0.4 kg/t ratio) was observed, in comparison with the conventional binder, bentonite (5 kg/t ratio). Bentonite-containing mixture has showed slightly lower porosity and lower permeability, also indicating a higher resistance of the pellets formed. |
Resumo em outra língua: | A determinação de propriedades físicas das pelotas é de grande importância industrial uma vez que são esses parâmetros que permitem um melhor aproveitamento dos finos nas usinas. Vários trabalhos relacionando diferentes variáveis de processo com as propriedades da pelota produzida podem ser encontrados na literatura, porém é muito difícil prever quantitativamente a distribuição granulométrica dos aglomerados de uma nova formulação somente com o conhecimento de suas propriedades mineralógicas, químicas. Neste estudo foi realizada a caracterização do minério, avaliado o efeito da velocidade de rotação do tambor granulador e a comparação de desempenho entre dois aglomerantes. Houve redução do diâmetro médio dos grânulos com a utilização de aglomerante baseado em carboximetilcelulose (Peridur 330, sob dosagem de 0.4 kg/t) em comparação com bentonita (sob dosagem de 5 kg/t). As pelotas contendo bentonita apresentaram porosidade ligeiramente menor e menor permeabilidade, indicando também uma maior resistência das pelotas formadas. |
URI: | http://www.repositorio.ufop.br/jspui/handle/123456789/13907 |
DOI: | http://dx.doi.org/10.4322/2176-1523.20212197 |
ISSN: | 2176-1523 |
Licença: | This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Source: The article PDF. |
Aparece nas coleções: | DEMIN - Artigos publicados em periódicos |
Arquivos associados a este item:
Arquivo | Descrição | Tamanho | Formato | |
---|---|---|---|---|
ARTIGO_EffectBinderDrum.pdf | 938,37 kB | Adobe PDF | Visualizar/Abrir |
Os itens no repositório estão protegidos por copyright, com todos os direitos reservados, salvo quando é indicado o contrário.