Reuse of iron ore tailings from tailings dams as pigment for sustainable paints.

Abstract

In order to minimise the environmental, social and economic impacts caused by the mining activity, this work proposes the use of iron ore tailings from tailings dams (IOT) as pigment in the production of a paint for buildings e the Sustainable Paint. The waste originates from the mining activity in the state of Minas Gerais. For this work, it was used in its raw state, subjected only to drying and lump breaking. In addition to IOT and water, four types of binders were tested: polyvinyl acetate (PVA) resin (in the form of ordinary white glue), acrylic resin, hydrated lime for painting and high early strength Portland cement. Binder contents ranged from 0% to 50% over the mass of IOT. For the evaluation of the mixtures, four main parameters were used: cost, colour homogeneity, abrasion resistance, and durability to external exposure, using the colour difference methodology DE (Delta-E). The results of binder evaluations were compared among themselves and with conventional paints from a brand recognised by the Brazilian Association of Paint Manufacturers. The Sustainable Paint presented reddish colour; suitable opacity; satisfactory results regarding durability at a significantly lower cost. In general, the blends with IOT, especially those using PVA as binder, have proved to be promising alternatives for paintings prepared in situ. It is noticeable the wide potential of use of this pigment by communities affected by iron ore tailings dams throughout Brazil and worldwide.